Furniture

Explore 786 award-winning designs tagged Furniture on Homeware Design.

Designer / Brand: Jiangsu Careseen E-Commerce Co., Ltd. Project: Home Textile Pillow Core Classification: Furniture

Da Vinci

Da Vinci is a cervical pillow designed to support the head and neck during sleep. The pillow uses a two section design formed by a quilting process. Two thirds is the headrest area, filled with high fluffy down, and one third is the cervical support area, filled with Japanese pipe tubes. The cover is made of 100 percent cotton. A zipper allows the tubes to be removed, so the height can be adjusted. The shape supports the neck and holds the back of the head. The aim is to correct the curve of the cervical spine and improve sleep.

Continue reading about Da Vinci Home Textile Pillow Core

Designer / Brand: Bryce Cai Project: Table Classification: Furniture

Fan

Fan is a coffee table inspired by the Chinese folding fan. The tabletops are made of marble and artistic bark, combined with a central bronze piece shaped as a half-moon. The curved metal surface recalls an open fan, an object linked in Chinese culture with kindness and with moving freely. A semicircular space at the center can hold flowers or small ornaments. The marble was sanded repeatedly to fit the curved metal precisely. The table measures 1120 mm in width, 1120 mm in depth and 700 mm in height.

Continue reading about Fan Table

Designer / Brand: Natalia Komarova Project: Sofa Classification: Furniture

Shell

The Shell sofa appeared as a combination of sea shells outlines and fashion trends in imitating exoskeleton technology and 3d printing. The aim was to create a sofa with the effect of optical illusion. It should be the light and airy furniture that could be used both at home and outdoors. To achieve the effect of lightness a web of nylon ropes was used. Thus the hardness of the carcass is balanced by the weaving and softness of the silhouette lines. A rigid base under the corner sections of the seat can be used as side tables and soft overhead seats and cushions finish the composition.

Continue reading about Shell Sofa

Designer / Brand: Cameron Smith Project: Folding Yacht Chair Classification: Furniture

Decker

Decker is a folding chair designed for use on yachts. The chair opens as a low lounge chair and folds to a compact form only 100 millimetres thick. The frame is made of stainless steel with trapezoidal tubing and cast lugs, joined by brass hardware at the pivot points. Teak slats are attached to webbing straps rather than to the frame, so the seat and back flex with the user. An over-centre geometry holds the straps in tension when the chair is open. A jog in the seat frame forms a carrying handle, and magnets keep the folded legs in place.

Continue reading about Decker Folding Yacht Chair

Designer / Brand: Xiangzhi Zhao Project: Speculative Vase Classification: Furniture

2182 Vessel

2182 Vessel is a ceramic wine glass designed to hold premium champagne. The form refers to four historic drinking vessels: the Patera, the Kylix, the Tazza cup and the champagne coupe. A wide opening allows the aroma to spread quickly. Drinking takes place in two stages. The shallow upper part holds the first portion and supports the sense of smell. The narrow middle section slows oxidation, so the wine in the deeper lower part keeps its taste. The glass measures 50 mm in width, 50 mm in depth and 140 mm in height.

Continue reading about 2182 Vessel Speculative Vase

Designer / Brand: Mattice Boets Project: Outdoor Sofa Classification: Furniture

Pebble

Inspired by the tactility of pebbles, Pebble is an outdoor sofa made from white-grey cork. It consists of various pebble-like cushions that perfectly fit together. The design translates the tactility of pebbles, the urge to feel and touch, into a pebble-like composition that everyone can experience at any time of the year. The sofa can be left outdoors permanently and is resilient against natural weathering. The use of cork is a premier in outdoor furniture. It allows a new design language to emerge, is lightweight, and shows the potential of using cork beyond indoor use.

Continue reading about Pebble Outdoor Sofa

Designer / Brand: Nora Voon Project: Folding Chair Classification: Furniture

Memphis

The simple yet elegant design is handcrafted in rustproof stainless steel in powder coated finish. Inspired from a paperclip and childhood candies, this a stackable folding chair that has a very clean and minimal frame design. The idea is to make a folding chair that pays attention to detail like the exposed brass screws and the groove throughout the frame of the chair. The profile is very simple and was designed intentionally to make it look almost like a line drawing therefore drawing the viewer to look closer at the details. The chair can be easily flat packed or stacked for large shipment

Continue reading about Memphis Folding Chair

Designer / Brand: Arevo Project: Lounge Chair Classification: Furniture

Mishima

Mishima is a lounge chair built around a frame of continuous carbon fiber composite. The frame is 3D printed as a single unibody form, without joints, bolts or glue. A one leg structure supports the asymmetric seat, which can rotate a full 360 degrees. A stainless steel base completes the chair. Upholstery is offered in vionette, mohair wool or leather, and a matching ottoman can be added, allowing up to 186 combinations. The organic curves and balanced form were inspired by a stone chair in the Mishima Grand Shrine in Japan.

Continue reading about Mishima Lounge Chair

Designer / Brand: Frédéric Haven Project: Dining Table Classification: Furniture

Marcello

Havani's new Marcello Table has the right shoulders to carry a soulmate in style. A uniquely finished stone or wooden tabletop. Available in 4 different metals and 67 colors, this very fine frame with 1 cm thin legs, can reach lengths up to 3 meters, even with exceptional marble tops. The quarter round edge finish flows almost seamlessly from the frame into tabletop and guarantees a very comfortable position for users' wrists and forearms. The Marcello table is 100 percent made in Belgium and delights users with a unique look and feel experience, luxurious materials, and tremendous durability.

Continue reading about Marcello Dining Table

Designer / Brand: Gang Wang Project: Tea Tray Classification: Furniture

Shi

Shi is a tea tray designed for preparing and serving tea. Shi combines a natural stone disk with an aluminum water chassis. The surface is divided into a flat area and a concave area, with a height difference of 16 millimeters. The flat area stays dry and holds the tea set, while the concave area collects and drains the used water. The drain sits at the lowest point of the concave surface, so the water level remains visible and the tray can be emptied in time. The stone is shaped by computer controlled cutting and finished by sandblasting.

Continue reading about Shi Tea Tray

Designer / Brand: Roberta Banqueri Project: Armchair Classification: Furniture

Ponto

Ponto is an armchair made for small spaces and varied interiors. The design uses few elements. A single long curved line forms the structure, the arms and the backrest. The seat and backrest are upholstered, and the anatomic form of the seat supports comfort. The outer structure is made of solid turned wood, and a metal tubular core reinforces the arms. A metal tubular support in an X shape holds the seat. Different types and colors of wood can be combined at the joints of the turned parts. Ponto is part of a family of seats.

Continue reading about Ponto Armchair

Designer / Brand: Jonathan Beldner Project: Coffee Table Classification: Furniture

Samara

Samara is a coffee table with removable lap desks. The form is inspired by the winged maple seed pods known as samara. Samara is made of solid walnut and cherry wood from locally sourced hardwoods, and the parts are shaped by CNC machining. Cross laminated timber legs give the table strength and stability. Laser engraved leaves decorate the top surface. The top cap can be unscrewed to release small tray tables, which serve as work surfaces or as trays for eating. The table measures 1200 mm in width and 430 mm in height.

Continue reading about Samara Coffee Table